Repair Checklist For Every Repair
Repair Checklist
Our repair checklist explains what we inspect when your controller or ECU arrives, how we check the workmanship, and what we test before sending it back.
On Arrival: Initial Inspection
Before we touch anything, we log your device and carry out a full arrival inspection:
- Physical condition documented (existing scratches, cracks, wear noted)
- All reported faults confirmed and recorded
- Additional faults identified that you may not have noticed
- Device photographed before work begins
We'll never carry out work beyond what's agreed without contacting you first.
During the Repair: Workmanship Standards
Our technicians follow strict standards throughout every repair:
- Soldering — all joints inspected under magnification. Cold joints, bridges, or insufficient solder are reworked before proceeding
- Component handling — ESD (electrostatic discharge) precautions followed at all times to protect sensitive electronics
- Torque — screws tightened to correct specification. No stripped heads, no overtightening
- Connectors — all ribbon cables and connectors reseated correctly and checked for damage
- Cleanliness — flux residue cleaned from all solder points after work
Controller Repairs: Post-Repair Checklist
Every controller goes through a full function test on a live console before sign-off:
- ✅ Left and right joysticks — full range of motion, no drift, correct deadzone
- ✅ All face buttons (cross, circle, square, triangle / A, B, X, Y)
- ✅ D-pad — all four directions
- ✅ Triggers (L2/R2 or LT/RT) — full analogue range tested
- ✅ Bumpers (L1/R1 or LB/RB)
- ✅ Touchpad (PS5) or Share/Options buttons
- ✅ Haptic feedback / rumble motors
- ✅ Charging port — cable seated correctly, charging confirmed
- ✅ Wireless connectivity confirmed
- ✅ Battery level checked
Browse our mail-in controller repair services.
ECU Repairs: Post-Repair Test Checklist
ECU work is signed off only after the following are confirmed:
- ✅ Full diagnostic scan — no fault codes present
- ✅ Programming verified against vehicle specification
- ✅ All relevant modules communicating correctly on the CAN bus
- ✅ Immobiliser and security functions verified where applicable
- ✅ Bench test completed before dispatch
Browse our automotive ECU and module services.
Before It Leaves Us
Once testing is complete, your device is:
- Cleaned externally
- Carefully packaged to prevent transit damage
- Sent with tracked, insured shipping
We stand behind our work. If something isn't right when you receive your device, contact us and we'll make it right.